Standard splice trays
Mechanical protection of individual fusion splices in trays and cassettes compatible with sleeves of 60 mm.
Fiber Optics · Fast Connectors & Splices
60 mm Heat-Shrink Fusion Splice Protection Sleeves, Bag of 100
✓ RoHS✓ ISO 9001✓ REACH✓ CE Compliant
Product DescriptionTransparent sleeve of 60 mm to protect fusion splices, with stainless steel reinforcement of 56 mm. Pack of 100 pieces per bag. The transparent tube allows checking splice position before shrinking.
Sleeve Length
Pack size
Pack size: Bag of 100 pieces100 sleeves of the same size per bag
Product Description Read full descriptionHide description
Transparent sleeve of 60 mm to protect fusion splices, with stainless steel reinforcement of 56 mm. Pack of 100 pieces per bag.
The transparent tube allows checking splice position before shrinking. The assembly combines an outer heat-shrink sleeve, an inner hot-melt tube and a stainless steel rod to reinforce the fusion-spliced area.
After centering the sleeve, use the appropriate heating cycle and allow it to cool before placing it in a compatible tray. Each sales unit is one complete bag of 100 sleeves of the same size.
Recommended Applications
Outside-plant optical closures
Reinforcement of the fusion point in distribution and splice closures for backbone or access networks.
ODFs and distribution boxes
Organization and protection of fusion splices inside optical distribution frames and cabinets.
Individual fusion splice protection
Support and insulation of the splice point against bending and handling during maintenance.
Controlled shrinking and placement
Center the fusion splice inside the sleeve, apply the correct heating cycle and let it cool before placing it in the tray.
Key Benefits
- Overall length of 60 mm
- stainless steel rod of 56 mm.
- Rod of Ø 1.2 mm to reinforce the fusion point.
- Hot-melt tube with an inner diameter of 1.3 mm.
- Outer diameter of 2.6 ± 0.1 mm after shrinking.
- Transparent sleeve for checking splice position.
- 100 pieces of the same size per bag.
DIRECT SUPPORT FOR BUSINESSES AND DISTRIBUTORS
Ready to use this solution in your next project?
Get preferential commercial terms, stock availability and specialist technical advice for your installation.
✓ Sales support✓ Wholesale pricing✓ Direct technical advice
Technical Specifications
SKUKG-FO-SP-60-100
TypeHeat-shrink protective sleeve for fusion splices
Overall sleeve length60 mm
StructureOuter heat-shrink tube, inner hot-melt tube and stainless steel rod
ColorTransparent
Stainless steel rod diameter1.2 mm
Stainless steel rod length56 mm
Hot-melt tube inner diameter1.3 mm
Hot-melt tube length60 mm
Outer diameter after shrinking2.6 ± 0.1 mm
CompatibilityTrays and holders suitable for sleeves of 60 mm and a shrunk diameter of 2.6 ± 0.1 mm
Installation methodCenter over the fusion splice, apply the appropriate heating cycle and allow to cool
Tensile strength (typical)18 MPa · ASTM D 2671
Elongation at break (typical)700 % · ASTM D 2671
Density (typical)0.94 g/cm³ · ISO R1183D
Dielectric strength (typical)25 kV/mm · ASTM D 2671
Volume resistivity (typical)10¹⁵ Ω·cm · IEC 243
Longitudinal change (typical)±5 % · ASTM D 2671
PackagingBag
Quantity per bag100 pieces
Sales unit1 bag of 100 pieces
Test dataTypical material values and test methods transcribed from the supplied datasheet.
Warranty5 years
Certifications and ComplianceRoHS · ISO 9001 · REACH · CE Compliant
Technical Documentation
Download the official datasheet and certified PDF resources for projects and tenders.
Frequently Asked Questions
Quick answers to help you select and request this product.
What is the sales unit?
One bag with 100 sleeves of 60 mm. Order quantity refers to the number of bags.
What is the difference between 40 mm and 60 mm?
The 40 mm sleeve uses a 36 mm rod; the 60 mm sleeve uses a 56 mm rod. Both have a rod of Ø 1.2 mm, a hot-melt tube with an inner Ø of 1.3 mm and a shrunk outer diameter of 2.6 ± 0.1 mm.
Is it compatible with any tray?
Check that the holder accommodates sleeves of 60 mm and a shrunk diameter of 2.6 ± 0.1 mm.
How is it installed?
Slide on the sleeve before fusion splicing. Prepare and cleave the fiber, make the fusion splice, center the sleeve over it, heat with the appropriate cycle and let it cool before placement.
What does the 40 mm or 60 mm measurement refer to?
60 mm refers to the overall length of the sleeve and hot-melt tube. The reinforcement rod measures 56 mm; its length does not change the product name or SKU.
Related Products
Need help with this product?
Our team can help with quotations, availability and technical support for distributors.