Termination of 110 IDC patch panels
Insertion and trimming of conductors in compatible panels, following the installation's specified T568A or T568B scheme.
Professional Installations · Network Tools
Professional Impact Punch Down Tool with Reversible 110 Blade
✓ RoHS✓ ISO 9001✓ REACH✓ CE Compliant✓ CNAS
Product DescriptionImpact tool for inserting conductors into compatible 110 IDC terminals. Features a High/Low impact slider and a reversible blade with insertion and cutting ends. The orange-and-gray body has ribbed grip surfaces.
Product Description Read full descriptionHide description
Impact tool for inserting conductors into compatible 110 IDC terminals. Features a High/Low impact slider and a reversible blade with insertion and cutting ends.
The orange-and-gray body has ribbed grip surfaces. The blade can be removed from its holder to orient the appropriate end or replace it with a compatible spare. The mechanism seats the conductor in the IDC slot and, where applicable, trims excess in the same operation.
Intended for installation and maintenance of patch panels, network jacks and distribution blocks with 110 IDC terminals. Link category depends on the combination of components and termination quality; the tool alone does not certify cabling performance.
Before working, confirm wire gauge and conductor type, terminal geometry and blade position. Work without power, make a test termination, then inspect and check the wire map on completion.
Recommended Applications
Network outlet installation
Termination of compatible punch-down keystone jacks; check IDC geometry and supported wire gauge before using the tool.
Cabling distribution maintenance
Rework faulty terminations in compatible 110 IDC blocks and verify the wire map before returning the link to service.
Data outlet relocation
Re-terminate conductors in compatible jacks or blocks when reorganizing workstations, and verify the correspondence between outlet and panel port.
Key Benefits
- Impact termination of conductors in compatible 110 IDC terminals
- High/Low impact slider
- Reversible, removable blade for insertion with or without cutting
- Orange-and-gray ABS body with ribbed surfaces
- Blade replacement through the blade holder
- use compatible spares
- Point the cutting edge toward the excess to protect the link conductor
DIRECT SUPPORT FOR BUSINESSES AND DISTRIBUTORS
Ready to use this solution in your next project?
Get preferential commercial terms, stock availability and specialist technical advice for your installation.
✓ Sales support✓ Wholesale pricing✓ Direct technical advice
Technical Specifications
SKUKG-NT-PDT-110
TypeManual impact tool for IDC termination
Working InterfaceCompatible 110 IDC terminals; does not replace an RJ45 plug crimper
BladeReversible and removable; select the cutting or non-cutting end according to the termination
Impact adjustmentHigh/Low slider; use the setting permitted by the terminal manufacturer
Body materialABS with ribbed grip surfaces
Blade materialCarbon steel, according to the supplier's specification
ColorOrange and gray with a black blade holder
Conductor compatibilityCheck wire gauge, conductor type and IDC geometry with the jack or block manufacturer
Other IDC systemsKrone or 66 compatibility requires a specific blade and validation; universal compatibility is not claimed
Dimensions and net weightNot specified in this datasheet
ProcedureAlign the blade with the IDC slot and point the cutting edge toward the excess conductor
VerificationInspect conductor seating and check the link wire map after termination
MaintenanceClean debris and inspect the edge; replace only with blades compatible with the holder
SafetyWork on de-energized circuits and keep fingers away from the impact area
PackagingIndividual blister / industrial box packaging with sealed protection. Includes user manual and safety specifications.
Quality ControlVisual, dimensional and functional inspection by production batch
RoHSRestriction of hazardous substances according to the applicable declaration
REACH SVHCAssessment of substances of very high concern according to the current declaration
CE DoCCE Declaration of Conformity available for the applicable product or family
CNASTest report issued by a CNAS-accredited laboratory, when included in the batch documentation
ISO 9001Manufacturer's certified quality management system
Warranty5 years
Certifications and ComplianceRoHS · ISO 9001 · REACH · CE Compliant · CNAS
Technical Documentation
Download the official datasheet and certified PDF resources for projects and tenders.
Frequently Asked Questions
Quick answers to help you select and request this product.
Which terminals does this tool support?
It is intended for compatible 110 IDC terminals. Before use, confirm the blade and conductor with the terminal manufacturer. Universal compatibility with Krone or 66 is not claimed.
What should I check before using the tool?
Confirm the category, connector or terminal type, wire gauge and outer diameter. Test a sample before starting a production run.
How should it be maintained?
Keep it clean and dry, remove debris after each working day, inspect blades and moving mechanisms, and store it protected. Replace worn parts only with compatible spares.
Which compliance documents are shown?
KONGIA certification and compliance system: RoHS · ISO 9001 · REACH · CE Compliant · CNAS.
How do I request pricing and availability?
Sign in as a partner or request a quotation, stating SKU KG-NT-PDT-110, quantity, delivery country and estimated project date.
Related Products
Need help with this product?
Our team can help with quotations, availability and technical support for distributors.