Structured cabling
Data cable installation in conduit; the 50 m length helps plan the route without joining fish tapes.

The KONGIA Fiberglass Fish Tape, Ø4 mm, 50 m is a professional tool for feeding a fish tape and subsequently pulling cabling through conduit, concealed tubing and telecommunications raceways.
The KONGIA Fiberglass Fish Tape, Ø4 mm, 50 m is a professional tool for feeding a fish tape and subsequently pulling cabling through conduit, concealed tubing and telecommunications raceways. Its yellow fiberglass-reinforced rod has a nominal diameter of Ø4 mm and is stored in a circular ABS reel with a ribbed black handle for field transport and operation.
The 50 m (164.04 ft) length is intended for extended routes, multiple conduit sections and projects with longer cable runs. The flexible metal leader and pulling loop help connect the cable before pulling; the installer must size the bundle and route to avoid jams, forced bends or accessory damage.
This product is not marketed as an insulated tool or equipment for energized work. Before use, de-energize the circuit, verify absence of voltage, inspect the rod and terminals, and use appropriate protective equipment.

Data cable installation in conduit; the 50 m length helps plan the route without joining fish tapes.
Routing of network, signal or control cable through prepared, de-energized raceways.
Routes between cabinets, trays, raceways and pull boxes during expansions or maintenance.
Feeding a fish tape into concealed tubing or surface conduit before attaching the cable to the pulling terminal.
Assistance with retrieving or adding cabling in existing routes after inspecting the path.
Get preferential commercial terms, stock availability and specialist technical advice for your installation.
Download the official datasheet and certified PDF resources for projects and tenders.
Quick answers to help you select and request this product.
Its nominal length is 50 m (164.04 ft), recommended for extended routes, multiple conduit sections and projects with longer cable runs. Final selection depends on the actual route, pull boxes and changes in direction.
No. De-energize, lock out where applicable and verify absence of voltage before working. The steel series is conductive and the fiberglass series includes metal accessories; neither is marketed for energized work.
A complete reel with the corresponding fish tape and pulling terminal. Cables, lubricant, protective equipment and auxiliary tools are not included.
Yellow fiberglass-reinforced rod with a nominal diameter of Ø4 mm.
Secure the cable to the pulling loop or eye with a compact, smooth connection suitable for the route. Avoid a bulky connection that could become stuck in the conduit.
Inspect the fish tape, reel, outlet, joints and pulling terminal. Do not use the product if you observe breakage, deformation, hazardous edges or loose accessories.
Maintain continuous, controlled pulling, coordinate feeding and pulling when two technicians are working, and stop if resistance increases abnormally.
No. These values are not shown until final traceable documentation has been approved for the commercial SKU.
Clean, dry, wound on its reel and protected from impacts, chemicals and conditions that could damage the fish tape or accessories.
KONGIA certification and compliance system: RoHS · ISO 9001 · REACH · CE Compliant · CNAS.
Our team can help with quotations, availability and technical support for distributors.