The KONGIA Screw-Mount 19-Inch Rack Blank Panel, 4U is designed to close empty 4U spaces in 19-inch racks and network cabinets. By covering an unused opening, it improves the rack front's appearance, reduces direct dust entry through the front plane and helps limit airflow…
The KONGIA Screw-Mount 19-Inch Rack Blank Panel, 4U is designed to close empty 4U spaces in 19-inch racks and network cabinets. By covering an unused opening, it improves the rack front's appearance, reduces direct dust entry through the front plane and helps limit airflow through unplanned spaces as part of an overall ventilation strategy. Its solid front with a nominal width of 483 mm is made from 1.5 mm cold-rolled SPCC steel. Manufacturing includes pickling, degreasing, phosphating, imported plastic powder application, electrostatic spraying and baked paint. Surface treatment provides corrosion protection, while nanometric cutting technology and deburring help achieve precise, safe edges. Four mounting holes provide conventional, uniform fastening; four M6 × 14 sets with cage nuts and plastic washers are recommended to complete installation. The nominal height of 177.8 mm corresponds to 4U and must match the available space exactly; one U size does not replace another. Before installation, check rail profile, hole pattern, cabinet tolerances and clearance from doors, equipment and cabling. This product supports disciplined airflow management, but its thermal effect depends on the complete rack design, active ventilation, load distribution and environmental conditions.
Covers empty 4U spaces between patch panels, switches and organizers for a continuous, professional and easy-to-inspect front. Four-point mounting provides a conventional, stable solution for installations prioritizing permanence and uniformity.
Helps reduce unplanned airflow paths through the rack front when used as part of a complete containment, ventilation and thermal distribution strategy. Does not replace project thermal analysis.
Closes positions reserved for future expansion, visually conceals the interior and avoids open gaps around NVRs, power supplies, PoE switches and connection panels.
Organizes wall-mounted or floor-standing cabinets in offices, shops and buildings with an exact 4U free space. The solid surface facilitates external cleaning and improves customer-facing presentation.
Configures demonstration or preassembly racks with clearly defined spaces, preserving positions for equipment to be added later.
Get preferential commercial terms, stock availability and specialist technical advice for your installation.
Download the official datasheet and certified PDF resources for projects and tenders.
Quick answers to help you select and request this product.
No. They are two separate families because they use different mounting mechanisms. Select the system corresponding to the project's rail and installation procedure.
No. This model occupies exactly 4U; 1U, 2U, 3U, 4U and 5U are not interchangeable sizes.
Designed for common 19-inch mounting planes, but rail profile, holes and tolerances can vary. Check rack dimensions and mounting points before installation.
Four complete M6 × 14 sets are recommended, each with screw, cage nut and plastic washer.
No specific temperature reduction is promised. The panel can reduce unwanted air paths as part of a complete airflow strategy, but results depend on the entire system.
Yes. The panel receives pickling, degreasing, phosphating, imported plastic powder, electrostatic spraying and baked paint as corrosion-resistant surface treatment.
The specified panel thickness is 1.5 mm.
Nanometric cutting technology, followed by edge treatment for a precise finish.
KONGIA 5-year warranty.
Includes one screw-mounted blanking panel; commercially, inclusion of four complete M6 × 14 sets is recommended.
Our team can help with quotations, availability and technical support for distributors.
