22U Floor-Standing Network Cabinet, 19-Inch, 600 mm Depth

The KONGIA KG-RACK-F22U-600 network cabinet is designed as a protected, documentable and easy-to-maintain consolidation point for professional data, telecommunications and electronic security installations. Its external dimensions of 600 × 1200 × 600 mm and 22U capacity organize 19-inch equipment and maintain logical separation between cabling, power and active devices. Its floor-standing format creates organized, expandable infrastructure with switches, patch panels, organizers, PDUs, shelves, fiber optics and security equipment. Internal volume facilitates planning for power, bend radii, rear maintenance and spare rack units. Construction uses cold-rolled SPCC steel with galvanized square-hole mounting posts, 1.35 ± 0.1 mm for the main frame, rear panel and top and bottom panels; 1.6 ± 0.1 mm for adjustable 19-inch mounting posts; and 1.35 ± 0.1 mm for the door frame and removable side panels. This architecture provides rigidity where loads concentrate while preserving installation and service access. The perforated front door promotes air exchange around active equipment; however, actual heat load must be evaluated and supplemented with forced ventilation when the project requires. Removable side panels simplify cable routing, connection and equipment replacement. Top and bottom entries allow data and power cables to be routed and separated; adjustable posts help adapt usable depth to each device. The finishing process includes acid pickling, degreasing, phosphating, imported powder paint application and black electrostatic coating for a uniform surface resistant to technical use. Design and manufacturing strictly comply with ANSI/EIA RS-310-D, IEC 297-2 and GB/T 3047.2-92. Before installation, verify usable depth, weight, consumption, heat dissipation, grounding, anchoring and load distribution of all equipment.