Junction boxes
Joins or branches up to 5 conductors inside a protected enclosure.

KONGIA Lever Wire Connector, 5-Way, 32 A, 250 V, 30-Pack joins and distributes copper conductors without screws. Each input has an independent orange lever: lift it, insert the pre-stripped conductor and close it to complete the connection.
KONGIA Lever Wire Connector, 5-Way, 32 A, 250 V, 30-Pack joins and distributes copper conductors without screws. Each input has an independent orange lever: lift it, insert the pre-stripped conductor and close it to complete the connection. The transparent housing makes it easier to check copper position and maintain a consistent process during installation, expansion and maintenance.
The 5-way configuration is intended for distributing five conductors inside boxes and panels. According to the supplied references, its rating is 32 A and 250 V, it accepts solid, stranded and flexible copper conductors from 0.08 to 4.0 mm², and requires 10 mm of insulation to be removed. Its dimensions are 20.5 × 26.6 × 14.5 mm.
The commercial package contains 30 connectors. The product may be reused while the housing, levers and contacts remain intact. No IP rating is declared; it must be installed inside a suitable box or enclosure, following the circuit design and applicable electrical regulations.

Joins or branches up to 5 conductors inside a protected enclosure.
Facilitates compact connections during assembly, replacement and maintenance.
Organizes copper conductor distribution with visual inspection.
Enables extensions and changes without screw connections.
The individual lever allows opening and reconnection when the component is in good condition.
Get preferential commercial terms, stock availability and specialist technical advice for your installation.
Download the official datasheet and certified PDF resources for projects and tenders.
Quick answers to help you select and request this product.
It has 5 inputs and 5 independent orange levers.
The supplied reference specifies 32 A and 250 V. These values must not be exceeded.
Accepts solid, stranded and flexible copper conductors from 0.08 to 4.0 mm².
The stated strip length is 10 mm. Copper must reach the stop without remaining exposed outside the housing.
Yes, during installation and maintenance, provided the housing, levers and contacts show no damage, contamination, deformation or overheating.
Aluminum compatibility is not published; standard selection is limited to copper conductors.
No IP rating is declared. It must be installed inside a box or enclosure suitable for the environment.
Includes 30 connectors with 5 ways. Cables, tools and installation box not included.
KONGIA certification and compliance system: RoHS · ISO 9001 · REACH · CE Compliant · CNAS.
Our team can help with quotations, availability and technical support for distributors.