Optical distribution in ODFs
OS2 single-mode G.652D 9/125 µm interconnection between panels and equipment with SC/UPC and SC/UPC interfaces.

KONGIA SC/UPC to SC/UPC patch cord, with OS2 single-mode G.652D 9/125 µm fiber and two-fiber duplex construction. Designed for single-mode transmission and reception interconnections between network equipment and optical distribution frames.
KONGIA SC/UPC to SC/UPC patch cord, with OS2 single-mode G.652D 9/125 µm fiber and two-fiber duplex construction. Designed for single-mode transmission and reception interconnections between network equipment and optical distribution frames.
The yellow LSZH jacket, with a diameter of 2.0 mm, facilitates cable identification. Available in 1 m · 2 m · 3 m · 5 m · 10 m · 20 m; choose the right length to connect equipment without leaving unnecessary excess in the rack or cabinet.

OS2 single-mode G.652D 9/125 µm interconnection between panels and equipment with SC/UPC and SC/UPC interfaces.
Organization of optical links, checking that each end matches the equipment's connector and polish.
Two fibers to connect Tx and Rx ports. Check end-to-end polarity before commissioning the link.
Jumper replacement and connection reorganization using suitable lengths, keeping connectors clean and avoiding tight bends.
Assembly selection by interface, fiber and length. For exposed routes or special raceways, confirm the required jacket before selecting the cable.
Get preferential commercial terms, stock availability and specialist technical advice for your installation.
Download the official datasheet and certified PDF resources for projects and tenders.
Quick answers to help you select and request this product.
Select the length on this product page: 1 m · 2 m · 3 m · 5 m · 10 m · 20 m. The order model includes the length; for example, KG-FO-PC-SCU-SCU-OS2-DX-01M.
Check the fiber type, connector and polish of each port. An APC connector must mate with an APC port and a UPC with a UPC port; do not connect them directly to each other.
This configuration uses two fibers (duplex), OS2 single-mode G.652D 9/125 µm.
Inspect and clean connector end faces. Remove caps only when connecting, avoid tight bends and do not pull on connectors when routing the cable.
Jacket selection depends on the installation route. Ask about the appropriate version if you need outdoor use, water resistance or a specific reaction-to-fire rating.
Our team can help with quotations, availability and technical support for distributors.