The KONGIA Sliding 19-Inch Rack Shelf, 1U, 500 mm Depth turns one rack unit into a professional surface for service, test and maintenance equipment requiring frequent front access in floor-standing racks.
The KONGIA Sliding 19-Inch Rack Shelf, 1U, 500 mm Depth turns one rack unit into a professional surface for service, test and maintenance equipment requiring frequent front access in floor-standing racks. Intended for devices without 19-inch mounting ears or requiring continuous support inside a wall-mounted or floor-standing cabinet. The platform uses 1.5 mm cold-rolled SPCC steel with folded edges for rigidity and a distributed static load capacity of up to 25 kg. The longitudinal slot pattern allows air to circulate around and below equipment, reducing obstruction compared with a fully closed plate. The pull-out platform and telescopic rails facilitate front access during installation, inspection and maintenance. Machined front ears facilitate alignment with posts, while the matte black electrostatic powder finish maintains a uniform appearance alongside switches, patch panels and other KONGIA accessories. Before specifying it, check usable cabinet depth, rail space requirements and cable slack during extension. For safe installation, center the equipment, distribute the load across the surface and secure all mounting points using the included M6 kit.
Telescopic rails and the front handle bring equipment closer to the technician for indicator inspection, cable connection or adjustments without fully removing the platform. Sufficient cable slack must be maintained throughout travel.
The 500 mm depth provides a large surface for non-rack control, communications and diagnostic equipment. Suitable for floor-standing cabinets with sufficient internal space for rails and rear connections.
Facilitates access to compact consoles, auxiliary equipment, programming units and service devices used with CCTV, access control or network systems. The uniform load capacity up to 25 kg accommodates larger equipment than compact fixed models.
Useful for integrators who periodically handle equipment during configuration, testing or diagnostics. Front extension reduces the need to work inside the rack and helps maintain an organized installation throughout the support cycle.
Get preferential commercial terms, stock availability and specialist technical advice for your installation.
Download the official datasheet and certified PDF resources for projects and tenders.
Quick answers to help you select and request this product.
Recommended for service, test and maintenance equipment requiring frequent front access in floor-standing racks. Verify equipment dimensions, weight and ventilation before installation.
Compatible with standard 19-inch racks and cabinets. Sufficient internal depth and appropriate mounting points for the shelf type are required.
The stated static capacity is 25 kg with uniformly distributed load. Avoid concentrating weight on one edge.
No. Its nominal height is 1U (44 mm), although additional space is recommended when equipment needs more ventilation.
Yes. The surface has longitudinal slots to promote airflow around installed equipment.
Yes. It includes side telescopic rails and a front handle for extending the platform during installation or maintenance.
Includes a KONGIA shelf, 8 M6 screws, 8 M6 cage nuts and installation manual.
Center equipment, distribute load over the largest possible surface and secure all mounting points before placing equipment.
KONGIA certification and compliance system: RoHS · ISO 9001 · REACH · CE Compliant · RoHS 2.0 · CE-DOC · EN 10204 · ISO 14001.
Our team can help with quotations, availability and technical support for distributors.
